IP over DWDM & Optical Line System

‘Internet Protocol (IP) over DWDM’ is the concept of sending data packets over an optical layer using DWDM for its capacity and other operations. In the modern-day world, the optical layer has been supplemented with more functionality, which was once in the higher layers. This creates a vision of an all-optical network where all management is carried out in the photonic layer. The optical network is proposed to provide end-to-end services completely in the optical domain, without having to convert the signal to the electrical domain during transit. Transmitting IP directly over DWDM has become a reality and is able to support bit-rates of 400Gbps. As we can clearly see, it holds the key to the bandwidth glut and opens the frontier of terabit Internets too.


Some key elements of optical transport performance

Different Fiber Types for Different Applications

Optical Signal-to-Noise Ratio(OSNR)

  • OSNR is a measure of the ratio of signal level to the level of system noise
  • As OSNR decreases, possible errors increase
  • OSNR is measured in decibels(dB)
  • EDFAs are the source of the noise.

Attenuation

  • The attenuation of the optical fiber is a result of two factors, absorption, and scattering. 
  • Additionally caused by passive media components, such as cables, cable splices, and connectors.

Dispersion

  • Material Dispersion occurs because the speed of light varies at different wavelengths through glass
  • Waveguide Dispersion is caused because the light is being transmitted in the fiber’s mode-field diameter (MFD), which includes the fiber core and the inner part of the cladding. 

  • Even small amounts of glass ovality/non-concentricity or non-concentric stresses in the cable can cause one of the polarizations to travel faster than the other, spreading out in time as they travel along with the fiber. This phenomenon is called polarization mode dispersion (PMD).

Non-Liner Effects

  • Polarization Mode Dispersion(PMD)
  • Caused by Non-Linearity of Fiber Geometry
  • Effective for Higher Bitrates
  • Four-Wave Mixing (FWM)
  • Effects multi-channel systems
  • Effects higher bit rates
  • Self/Cross Phase Modulation (SPM,XPM)
  • Caused by high channel power
  • Caused by channel interaction


Fiberroad

Optical Transport Performance Solution